De
Ru En Se Kz
Home Other productsMechanical Load Test Bench
Zurück

Mechanical Load Test Bench

  • Work area size*
    up to 2000x1000 mm
  • Module position
    horizontal, rigid fixation
  • Number of independently controlled groups
    2 rows of 5 groups
  • Applied pressure range
    1000 – 7200 Pa** 1000 – 5400 Pa***
  • Minimum cycle time
    10 sec.
  • Maximum amount of cycles
    10 000
  • Dimensions (Length * Width *Height)
    2390х1798х2680 mm
  • Weight
    700 kg
  • Warranty
    12 months
  • *One panel
  • **Pressing
  • ***Drawing
Make request
Beschreibung
The bench is intended for photovoltaic modules testing for mechanical loads impact in accordance with the requirements of the following standards:
GOST R 56980-2016 (IEC 61215:2005), GOST R IEC 61646-2013, IEC 62759-1:2015, IEC 61215-2:2016, IEC/TS 62782:2016, IEC 61730-2:2016.
Spezifikationen

General Info

  • Serial number
    SIMN-1/10
  • Manufacture date
    31.12.2018
  • Weight
    700 kg
  • Control unit weight
    maximum 105 kg
  • Dimensions*
    2390** х 1798 х 2680 mm
  • Open Circuit Voltage (Vос)
    52,26 V
*Length * Width *Height
**3040 mm including electrical cabinet

Mechanical Load Control

  • Work area size*
    up to 2000x1000 mm mm
  • Number of independently controlled groups
    2 rows of 5 groups
  • Applied pressure range
    1000 – 7200 Pa* 1000 – 5400 Pa**
  • Minimum cycle time
    10 sec.
  • Maximum amount of cycles
    10 000
  • Pressure heterogeneity along module area
    10% maximum %
  • Pressure maintenance accuracy
    ± 5 %
  • Pressure presentation accuracy
    ± 5 %
  • Strain gauge signal meter
    MV110-224.1TD
  • Strain gauge
    Zemic H3-C3-200kg-3B-D41
  • Strain gauge sensitivity
    2 mV / 2V
*Pressing
**Drawing

Service Conditions

  • Environmental temperature, °С
    from + 5 to + 35
  • Relative air humidity
    up to 60 %*
  • Power supply
    220 ± 5 V with 50 ± 0,5 Hz
  • Pneumatic system operating pressure
    0,6 – 0,9 MPa
  • Compressed air consumption under 0.6 MPa pressure 0,6 MPa
    250 l/min
  • Compressed air
    Class 7 as per GOST 17433-80**
*at temperature of +20°С
**content of solids under 40 µm is 4 mg/m3 maximum, water and oil content is not allowed
Dokumentation

Dokumentation herunterladen

Kundenbewertungen (0)

Kundenbewertungen (0)

Senden Sie Ihr Feedback

Schreiben Sie Ihr Feedback

Senden Sie Ihr Feedback zum Produkt und es könnte anderen Kunden helfen, eine Wahl zu treffen

(0)